Home | About Us | Products | Service&Support | News | Contact Us | Sitemap
 
  
 
 
Data Line Surge Protection
Lightning Rods
Lightning Protection Box
Lightning current counter
Power Surge Protection
 
You are here : Home > Power-Surge-Protection > Lightning Surge Protection for Photovoltaic Systems
Lightning Surge Protection for Photovoltaic Systems
    >> Power-Surge-Protection
Lightning Surge Protection for Photovoltaic Systems
     
 
Advantage >>

Lightning and Surge Protection for Solar Photovoltaic (PV) System, Lightning and Surge Protection for PV System, Surge Protection for Solar PV

Products Details >>
 
Product Description
Surge Protection for Solar Photovoltaic (PV) System
The OBV5-C40 series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The OBV5-C40 series is available for the main operating voltages in photovoltaic: 1000 Vdc.
 
The use of OBV5-C40 series Surge Protection is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. The electrical diagram of the OBV5-C40 series is based on high energy MOVs equipped with specific thermal disconnectors and related failure indicators. The OBV5-C40 series is made with plug-in modules to allow a fast and easy maintenance in case of failure (disconnection from the DC network).
 
Product Features
OBV1-C40 series Surge Protection for Solar Photovoltaic (PV) System
Discharge currents In: 20 kA / Imax: 40 kA
Plug-in modules
IEC 61643-1 compliance
 
Characteristics
CUAJE part number
OBV1-C40 series
Network voltage
500Vdc
800Vdc
1000 Vdc
Max. operating voltage Uc
530Vdc
840Vdc
1060 Vdc
Nominal discharge current ln
20kA
Max. discharge current lmax
40kA
Protection level (at In) Up
1.5kV
3.2kV
3.2kV
Disconnector
Thermal Disconnector
Internal
Mechanical characteristics
Dimensions
See diagram
Connection
by screw terminals: 4-25 mm2 / by bus
Disconnection indicator
1 mechanical indicator by pole
Mounting
symmetrical rail 35 mm
Operating temperature
-40/+85°C
Protection class
IP20
Standards compliance
NF EN 61643-11 France
Parafoudre Basse Tension
- Essais Classe II
IEC 61643-1 International
Low Voltage SPD - Test Class II
EN 61643-11 Europe
Parafoudre Basse Tension
- Essais Classe II
 
Installation and Connection Diagram
Dimensions
 

Related Products>>
Power Surge OBV7
 
Surge Protection Device OBV2/4P
 
Surge Protection Device OBV1-C40/4P
 
 
 
 
Add: Lvzhuang Industrial Zone, Liushi, Yueqing, Zhejiang, P.R.China PC: 325604
TEL: +86-577-62786680 FAX: +86-577-62730590 E-mail: cj@cuaje.com